How to Replace Door Handles

The door handles in your home are an essential part of the interior design. A new handle will elevate your home's decor and bring your decor to the present.

Over time, your door knobs may become stiff or even break. These are signs it's time to change the knobs. This guide will help you pick the right replacement door handle for your home.

Door Knobs

The handles on your doors can enhance the appearance of your home and allow you to shut and open them. They come in a variety of finishes, colors, and styles to complement your decor. If yours is beginning to show signs of wear or require an upgrade it is possible to replace them in a couple of simple steps.

You'll need to find the spindle, or shaft, through which the knob is attached to the door. Some knobs have a small opening that can be used with a screwdriver for removal of the set screws that hold the handle in place. Some have a small slot or hole through which you can use to press a spring-activated detent pin with flathead. This pin lets go of the latch mechanism and lets you pull or push the knob.

After you have gained access to the shaft or spindle, take off the door knob and replace it with the new one. Check that the latch functions properly before tightening new set screws.

After replacing the knob, you can place the rod that is attached to the latch over the hole on the door. Interlock it with the rod system on the second knob. Ensure that the holes are in alignment, then tighten the latch plate screws.

Some people choose a brushed or smooth metal finish for their upvc door handle repairs hardware to give their home a modern and sleek look. This can be matched with their furniture. Others prefer a more rustic look, which pairs well with farmhouse-styled spaces. If you have one of your family members with mobility issues, you may want to choose a lever style or rim lock that requires less pressure to operate.

Other aspects are being looked at more and more when it comes to the design of door handles. Accessibility and control of infections are two major issues that have led to the creation of new and innovative designs for handles like those that can be operated with a person's forearm.

Latch

The latch that opens your door can wear out from age and use. It is easy to change the latch on your sliding patio door handle replacement handle. This will result in huge differences in how it opens and closes.

Depending on what type of handle you use the latch can be a separate component or an integral part of the knob. In either case, you'll need to follow the same steps to remove and replace. Getting the old latch out of the way is relatively simple, especially if your door handle has what is known as a "magic button". The button is located on the left side of the knob, this small pressure-slot is what you need to press to pull the latch right out of the handle and off of the latching mechanism.

If your handle doesn't have this button, the first step is to take off any cover plates that rest over the latch plate. They are typically rectangular or circular and can be removed using a screwdriver to pry them off of the handle. Some have slots where you can place your screwdriver, whereas others just snap off.

Then, remove the machine screws that secure the plate's inner and latch to the door handle. These are the screws that are shorter with a sharp point - you will need to keep these in a safe place to reuse them in subsequent steps. Once these are off, you can take the latch plate and mechanism out of the door's hole and set it aside.

Then you can begin to install the new latch. Place the latch plate in the door hole and secure it with the hardware supplied. Make sure that the square pin that is on the interior of the latch is pointing towards the latching mechanism inside the handle and that it is lined up with the other screw chambers inside the door handle. Then, secure the exterior latch plate using the screws supplied.

Strike Plate

One of the most common reasons for replacing the door handle is because it feels loose or doesn't lock properly. This is usually due to incorrectly aligned parts of the latching mechanism, such as a striking plate that's either too short or has moved up or down on the doorjamb as time passes. This project allows you to replace your old strikeplate with an extended one, which will offer better security for your upvc door handle repair near me and ensure it stays closed.

To determine if the issue is due to the strike plate, apply some lipstick or Sliding Patio Door Handle Replacement similar marking material to the bolt that is used to latch. Close the door, then try to latch it. If the mark is below the strike plate hole it means that the plate is too small and the door will not latch. If the mark is higher than the strike plate hole, it's most likely that the strike plate has been moved up or down the doorjamb.

Depending on the door depending on the double glazed door handle repair, you might be able to simply attach the new strike plate into the existing one with the screws included with it. However, you might need to drill holes prior to drilling and then chisel out some of the wood to ensure it's snugly fitted. If this is the case, be cautious not to chisel too hard or you'll cause damage to the strength of your doorjamb.

Installing a new box-style strike plate will give the lock a more secure grip on the doors and will require more force to open the doors. Typically it will require two longer screws that anchor the strike plate to the frame of the door. To do this, you'll have to remove the existing strike plate, then drill and chisel away the wood to make space for the new one.

This hard-to-find strike plate is made to work with rim locks from the past, and it's made from sturdy solid brass in the heavy duty thickness. This kit includes wood screws and machine screws, so you can choose the right hardware for your requirements. Make sure to note that the wood screws have a sharp edge, whereas the machine ones are more blunt.